daviddsims 0 Posted January 27, 2018 I just purchased four LTS CMHD3553D-Z cameras but the literature was scarce. I'm trying to figure out how to zoom in or out with the camera. Do I need to do this in the DVR menu or actually on the camera? Share this post Link to post Share on other sites
CYANiDE 0 Posted January 29, 2018 I just purchased four LTS CMHD3553D-Z cameras but the literature was scarce. I'm trying to figure out how to zoom in or out with the camera. Do I need to do this in the DVR menu or actually on the camera? A quick google search shows the User Manual which looks like it indicates using the PTZ control interface to configure the focus and zoom for the camera. Share this post Link to post Share on other sites
daviddsims 0 Posted February 1, 2018 Yep I saw that when searching but it is not working. When I push focus or zoom the camera will say no signal and reboot. I did finally get three of the four cameras to work correctly but a few minutes later they quit again. I'm having a hard time believing that four cameras could have issues so I'm leaning toward a power supply issue or cabling. This one really has me stumped. Share this post Link to post Share on other sites
