aarons 0 Posted July 28, 2006 hello All I have a customer trying to use Dual Screens on his geo machine He wants to clone the main screen in the past this has been no problem. simply disable Direct draw and away you go He is using the GV-1120 with Ver 8 and unfortunately the direct draw overlayoption is greyed out Does anyone set this up regulary that might be able to help. thanks Share this post Link to post Share on other sites
rory 0 Posted July 28, 2006 You dont have to disable anything, just use the Video Card clone option .. He can also try DMPos.exe located in the Geo Main folder. Share this post Link to post Share on other sites
aarons 0 Posted July 28, 2006 The clone monitor is getting a pink screen where the video should be any known issues thanks Share this post Link to post Share on other sites
Bob 0 Posted July 29, 2006 go into display properties, settings, advanced, monitor... and change the horizontal refresh to 60 Hz. Share this post Link to post Share on other sites
aarons 0 Posted August 3, 2006 Tried that Still no luck Any other ideas ? thanks Aaron Share this post Link to post Share on other sites
rory 0 Posted August 3, 2006 what type of monitor is it? Share this post Link to post Share on other sites
Charlie 0 Posted August 3, 2006 Sounds like a lack of graphics card driver or directx. Share this post Link to post Share on other sites
odiggity 0 Posted August 4, 2006 i think your problem is with the video card, it may not be able to display video on 2 monitors at the same time. Try playing back any video file and see if it shows up on both monitors. I have an older ATI card withy dual displays and this is the behavior i notice. You shold find out if the video card can do this what I do is to use on of the other display modes that shows more than 1 camera. the larger image is video and shows up pink, while the smaller screens display video at a lower frame rate. Share this post Link to post Share on other sites
aarons 0 Posted August 7, 2006 Thank you guys for your input i have discovered that I needed the latest version of direct draw. the video card we were using had an older version Downloaded latest version from nvidia and all is good thanks again Share this post Link to post Share on other sites
UnlimitedPCS 0 Posted August 16, 2006 Same problem here. Geforce TI4200, latest Nvidia Drivers, latest DirectX drivers and I still get the pink video on the clone (secondary display). The large video screen is pink while the smaller ones are displayed? Share this post Link to post Share on other sites