matthewarcher 0 Posted April 13, 2018 My CCTV box is running the PSS V4.06 software. I have this message on screen I don't know how to get rid of. I have attached a photo. I was trying to set the PTZ camera up to show my car on the drive as the default place when there is a power cut. At the moment when the power goes off it defaults to the wall, not the driveway. WHen trying to reset this I have pressed something which gives the options close or enter and I cannot close the box. The box only has the mouse attached, how do I remove the message and make it so the camera defaults to the driveway?> Many thanks Matt Share this post Link to post Share on other sites
lozajo 0 Posted April 13, 2018 Hi, i´ve installed SmartPss 2.02 and i have a problem with the time clip tool to cut a playback video. It only cuts 60 minutes, please help me. Thanks Share this post Link to post Share on other sites
tomcctv 190 Posted April 13, 2018 My CCTV box is running the PSS V4.06 software. I have this message on screen I don't know how to get rid of. I have attached a photo. I was trying to set the PTZ camera up to show my car on the drive as the default place when there is a power cut. At the moment when the power goes off it defaults to the wall, not the driveway. WHen trying to reset this I have pressed something which gives the options close or enter and I cannot close the box. The box only has the mouse attached, how do I remove the message and make it so the camera defaults to the driveway?> Many thanks Matt Hi. Are you also connected to a recorder ? Is your camera analog HD or IP Share this post Link to post Share on other sites
tomcctv 190 Posted April 13, 2018 Hi, i´ve installed SmartPss 2.02 and i have a problem with the time clip tool to cut a playback video. It only cuts 60 minutes, please help me. Thanks Hi. Might of been better if you started your own post Why do you want to clip more than an hour ??? That is not what clip is for. Anything over half hour you should be doing a full time backup Share this post Link to post Share on other sites
matthewarcher 0 Posted April 14, 2018 Hi, The cameras are analogue, I think. 720s and 420s It is on the PTZ the message. I tried to make it go to the driveway as dafault when the power cuts but have pressed something and now have this message I cannot remove. Share this post Link to post Share on other sites
tomcctv 190 Posted April 14, 2018 Hi, The cameras are analogue, I think. 720s and 420s It is on the PTZ the message. I tried to make it go to the driveway as dafault when the power cuts but have pressed something and now have this message I cannot remove. Yes you said this in your first post PSS V4.06 software Is something you load onto pc. But still need to know if your also on recorder Share this post Link to post Share on other sites
matthewarcher 0 Posted April 15, 2018 Yes it records on a 30 day loop. The name of the recorder is a QVIS Share this post Link to post Share on other sites
matthewarcher 0 Posted April 15, 2018 I have managed to remove the writing by pressing a button on the recorder front, so now the annoying message has gone. Now I just need to know how to set a default position. Thanks Share this post Link to post Share on other sites
tomcctv 190 Posted April 15, 2018 Same way as you got shut of message 4 attempts just to find out what recorder Right click screen ...... ptz control ..... on ptz box click advanced then click on second top right icon ... enter ptz menu Share this post Link to post Share on other sites
matthewarcher 0 Posted April 15, 2018 I was asked twice if it recorded, not 4 attempts. How friendly. I bet you're one of the regulars who thinks they own the place because you answer the questions. Thanks for the help! Share this post Link to post Share on other sites
