darrenm 0 Posted April 17, 2018 I am setting up 16 camera and with an NVR. My current plan is to use all HikVision products for that, but I'm not fixed on it. This is in a large building (1000ft X 270ft) with cameras spread around. The NVR will be in the server room, far away from where the monitors need to be, and used for multi-day recording and offsite viewing (ex: mobile phone). It also needs to have workstations inside the building showing 1-2 cameras. Can the IVMS-4200 software be installed on a PC, placed wherever in the building, and point to the NVR for cameras to view live? Is that possible? How do people do this type of setup? Share this post Link to post Share on other sites
jeromephone 6 Posted April 17, 2018 You can set up the users with permission to view only specific cameras so when they log in they only get the view assigned to them. You would setup the users on the NVR as to which cameras you would want them to have access to. Look at doing this through the web interface as well. as the cms. Share this post Link to post Share on other sites
