caughtem 0 Posted May 12, 2018 In an attempt to make this succinct I am looking for some way to have the monitor display only the camera or cameras that are detecting motion and at the end of the event screen again goes blank. I can play back the what the dvr has recorded for the day and the only thing that is displayed is the camera that has recorded motion so I feel this may in some way be possible. The only way that I have been able to accomplish this so far is to leave one of the cameras recording continuously then set it to playback a few seconds behind the recording. The other three camera screens are blank until motion is detected. Any suggestions would be appreciated. Share this post Link to post Share on other sites
