arvg 0 Posted June 15, 2018 Hi im about to take on a installation that has around 120 cameras & im after some realistic advice in terms of the camera network ect system is all Avigilon & will consist of x2 Avigilon 36TB standard NVRs with ACC6 enterprise, no fail-over at this site x3 2 monitor workstations x43 2mp H4A x7 5mp H4A x22 2mp H4 PTZs x10 12mp 360 x32 2mp H4 SL x1 16mp Pro Site will have network switches located around the site, connected back to the server room via fibre. movement profile on 80% of cameras will be in the low detail, low motion profile ive done 50-60 camera installs in the past without a problem but the size of this i thought it would be best to ask before making a bad choice HDSM SmartCodec option in the compression settings will be set at medium for 90% of cameras im thinking ill split the cameras between both NVRs keeping camera bandwidth in mind, so my question is should i just keep them all in the same IP address range ie: 192.168.1.1 - 192.168.1.120 & have the 2 NVRs with 3 of the 4 NICs per NVR connected to the one switch in the camera server room? or should i be isolating the cameras onto different networks/switches? The camera network will be completely isolated to the client network ive undertaken the tutorial in the partner resource center "NVR-3-Standard and NVR-Premium best practices for 1 and 10GbE networks" so im a bit confused after the tutorial Cheers Andrew Share this post Link to post Share on other sites
ak357 0 Posted June 15, 2018 Who is your local Avigilon sales engineer? Where are u located? Hi im about to take on a installation that has around 120 cameras & im after some realistic advice in terms of the camera network ect Site will have network switches located around the site, connected back to the server room via fibre. movement profile on 80% of cameras will be in the low detail, low motion profile ive done 50-60 camera installs in the past without a problem but the size of this i thought it would be best to ask before making a bad choice ive undertaken the tutorial in the partner resource center "NVR-3-Standard and NVR-Premium best practices for 1 and 10GbE networks" so im a bit confused after the tutorial Cheers Andrew Share this post Link to post Share on other sites
arvg 0 Posted June 26, 2018 ive emailed him & also rang him, he is on annual leave from what the voicemail says so i thought i would give the forum a crack located in Australia Share this post Link to post Share on other sites
arvg 0 Posted June 27, 2018 this is what im thinking NVR A Nic1 and NVR B Nic1 connected to Camera subnet 1 192.168.10 range NVR A Nic2 and NVR B Nic2 connected to Camera subnet 2 192.168.20 range NVR A Nic3 and NVR B Nic3 connected to Camera subnet 3 192.168.30 range NVR A Nic4 connected to the Client network (client range) or NVR A Nic1 connected to Camera subnet 1 192.168.10 range NVR A Nic2 connected to Camera subnet 2 192.168.20 range NVR A Nic3 connected to Camera subnet 3 192.168.30 range NVR A Nic4 connected to the Client network (client range) NVR B Nic1 connected to Camera subnet 1 192.168.40 range NVR B Nic2 connected to Camera subnet 2 192.168.50 range NVR B Nic3 connected to Camera subnet 3 192.168.60 range NVR B Nic4 connected to the Client network (client range) Share this post Link to post Share on other sites
