magarlocate 0 Posted June 23, 2018 Dear friends i have GEO VISION 8182 out door ptz camera want to connect RS485 matrix system. please tell me how to setup protocal 9600 and baud rate so system support camera. Thanks guys all help are highly appreciated!!! THAPA Share this post Link to post Share on other sites
jeromephone 6 Posted June 23, 2018 Can you give me some more details on the camera I do not find it on the geo website and need to know if it is analog. on most analog PTZ cameras there are usually a set of dip switches that set protocol address and baud rates. Share this post Link to post Share on other sites
magarlocate 0 Posted June 24, 2018 Dear sir thanks for quick reply yes it is analog ptz camera i think geo vision stop produce already. when i set dip switch on and off but still unable to move Share this post Link to post Share on other sites
jeromephone 6 Posted June 28, 2018 you will have to try and find a manual to see specific settings many times there are two sets of dip switches. to set. If it does not try to find a home position when powered up the camera may be damaged the picture may still come through but the movement part may be shot. Share this post Link to post Share on other sites
