blowrabbit 0 Posted August 10, 2006 I have 2 different sites with the same Kalatel dvrme 16ct-A 320 gb and when at one location the audio cuts off and on with each increment of time going by [seconds] I should mention that at the site that the audio cuts out you can see that the seconds do not go by smoothly and every 3 or so seconds it skips a second,,, ? I have swaped the units and it happens only at the one site? Granted the offending site upload speed is only 385 kbps and the good site is almost T-1 or 1000 kbps. However the wavereader files are well below the 385 kb site as they are around 30-50kb by default? This is with a Loure Audio Kit for one channel that uses the db9 connection off the rear of the dvrme. You can actually see the seconds go by and hear it cut out for a second or fraction thereof. Puzzeled Again?> Additionally these units do remote streaming of playback audio dispite the ge tecks saying it shouldn't. I have had Dave at ge support see it remotely and he was surprized. Share this post Link to post Share on other sites
