18pcs 0 Posted August 10, 2006 Tried everything but cannot get my CyberDome to respond to the KTD 405. I programmed the Joypad to Digiplex mode, set the site address to 32 on the camera (Switch 6 up) and also terminated the 422 connection by turning the switch to ON. However the camera is unresponsive to the Joypad and behaves as if it was just plugged directly on its own. I am using the UTP and I/O box for the connections. Any suggestions please, have tried in Zone Mode too by connecting the Cyberdome and the Joypad to the DVR but no luck. Share this post Link to post Share on other sites
