Jump to content
Sign in to follow this  
PokerNap

small CCTV camera wiring

Recommended Posts

Hi guys...

 

THEY SEND ME THIS CAMERA WITH THE WRONG CABLE (JACK 2.5MM) , instead of RCA cable

 

Can you tell me please how to solder the wires, which color goes to which ?

 

I got the RCA CABLE RED,YELLOW,WHITE (I need only yellow and white?)

Charger is rated +12V - 500AMP

I cut the cable plug(jack 2.5mm) and left with 4 wires (green,brown,red,blue)

1204372074_IMG02.thumb.jpg.46f807f99c82cefe52b379fe5861a10d.jpg

590921586_IMG01.thumb.jpg.c2a95e138b15a439f745d2c6f473f1f8.jpg

Share this post


Link to post
Share on other sites

Camera specs:

Pick Up Element- Single chip 1/3 CMOS

Sistem- NTSC PAL

Pixel number- NTSC:656(H)×492(V) PAL:786(H)×576(V)

Dimensions- 14,5 x 14,5 x 15,5 x

Horizontal resolution- Aproximativ 520 TV Lines

Sistem Scan- 2:1 Interlace

Sensitivity- 0 Lux/F1.2

Lens and angle- 0.5mm F2.0 : 55 °

S/N Ratio- 48dB

Electronic Shutter- OUT (1/60 S TO 1/100000 S) OUT (1/50 S TO 1/100000)S

Auto Gain Control- OUT

White Balance Control- OUT

Back Light Compensation- OUT

Video Out- 1.0V p-p/75ohm

Audio Out- 1.0V p-p/1Kohm

Work power- 200mA

DC 12V

 

Camera should be like this RED(power) , YELLOW(video) , WHITE(audio)

816461561_microcameracctvnightvisionccctvmnv9403ee.jpg.59e1c772f4b22d354ea4ffd0de79f1b6.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×