niematoad 0 Posted September 13, 2018 I am running firmware version 1.0.4.9 on a magic series DVR. I have Magic Viewer installed on my phone for monitoring the cameras however, I can only monitor them when I am in the facility on the wifi. I am looking to be able to use magic viewer when away from the facility and not on the wifi. Any help would be greatly appreciated as I have been working on this for quite some time now, with no luck. Thanks! Share this post Link to post Share on other sites
jeromephone 6 Posted September 14, 2018 usually you would have to port forward the internal IP address so that the device can be seen from the outside world. You are seeing in your faciity because you are on the same addressing scheme and subnet Share this post Link to post Share on other sites