66ChevellePost 0 Posted September 16, 2018 Hi, I plan on replacing my camera wiring runs when the weather cools. Right now I have some cheap Ebay RG6 siamese wiring run and it's kind of thin stuff. I have a crawl space above the house I access to make my runs and I am getting up in years and not as flexible as I once was so when I pull new wire I want it to be my last. I have no runs longer than 60ft. So in saying that I just would like to get a consensus on what I should run. I have a spool of CAT5E cable already or should I go with Belden 549945 Siamese cable. I thought of running both types of wiring or would this be overkill and a waste of money. Right now I have 3 old cheap analog cameras but plan on replacing them with: Hikvision DS-2CE16C5T-VFIR3 Turbo HD Outdoor IR Bullet Camera 1/3" Progressive Scan CMOS HD-TVI Technology 720p HD (1280x720) resolution 2.8-12mm varifocal lens Smart IR LEDs 40m max. IR Distance 0 Lux with IR On Screen Display menu Digital Noise Reduction / Motion Detection / Privacy Masks Up the Coax (UTC) via coaxial cable IP66 rated Weatherproof 12VDC operation Other cameras I was looking at is: Hikvision DS-2CE16F7T-IT5 3 MP WDR EXIR Bullet 1/3" (3 MP) High-Performance CMOS Analog HD Output True Day/Night OSD Menu, DNR, Smart IR True WDR, Up to 120 dB EXIR IR, Up to 262 ft (80 m) RangeIP66 Weatherproof Up-the-Coax (HIKVISION-C) Hikvision DS-2CE16F7T-AIT3Z 3 MP Motorized VF EXIR 1/3" (3 MP) High-Performance CMOS Analog HD Output 2.8 mm to 12 mm Motorized Vari-Focal Lens True Day/Night OSD Menu, DNR, Smart IR True WDR, Up to 120 dB EXIR IR, 131 ft (40 m) Range Up-the-Coax (HIKVISION-C) IP66 Weatherproof, Wide Temperature Range Thanks for the input and advice. Kenny Share this post Link to post Share on other sites