Roman.CA 0 Posted October 1, 2018 I used glue gun to cover along any joints glass and around any possible places moisture can go in still getting moisture at night. Share this post Link to post Share on other sites
jeromephone 6 Posted October 2, 2018 you might need to go the other way make sure the camera has a vent of some kind to prevent moisture from building up. Some cameras have a silica Gel package to help absorb moisture. Share this post Link to post Share on other sites
Roman.CA 0 Posted October 5, 2018 you might need to go the other way make sure the camera has a vent of some kind to prevent moisture from building up. Some cameras have a silica Gel package to help absorb moisture. I have 2 more identical cameras and they all did this until i covered the gaps with electric tape and it stopped for good. However not this one. I think its same law as with car headlights if its sealed tight moisture don't build up inside if small opening then it will sweat like this in the morning. Share this post Link to post Share on other sites
Roman.CA 0 Posted November 1, 2018 Okay i noticed that when i turn of IR assist light problem white spots go away completely why is that? Share this post Link to post Share on other sites
51cent 8 Posted November 1, 2018 Take a look here, according to Hikvision it's possibly a dusty bubble. http://oversea-download.hikvision.com/uploadfile/doc/20140804/Technical%20Bulletin%20DS-2CD21x2-I%20Dome%20Camera%20IR%20Leakage%20v1.1.pdf Share this post Link to post Share on other sites
Roman.CA 0 Posted November 3, 2018 Take a look here, according to Hikvision it's possibly a dusty bubble.http://oversea-download.hikvision.com/uploadfile/doc/20140804/Technical%20Bulletin%20DS-2CD21x2-I%20Dome%20Camera%20IR%20Leakage%20v1.1.pdf Awesome thanks, it was totally the dust just wiping outside of the lens cover did the trick problem resolved. Share this post Link to post Share on other sites
