celnut 0 Posted October 8, 2018 Hi, I bought a PTZ dome from china, it states that it is a Sony 9600-1. I don't need the camera to switch to night mode as there is plenty of light and the IR triggers the other cameras when it is on guard tour, so I switched it to day mode by calling preset 83, but when I start the tour or A-B scan it switches back to night mode. Any ideas? Share this post Link to post Share on other sites
tomcctv 190 Posted October 8, 2018 Hi, I bought a PTZ dome from china, it states that it is a Sony 9600-1. I don't need the camera to switch to night mode as there is plenty of light and the IR triggers the other cameras when it is on guard tour, so I switched it to day mode by calling preset 83, but when I start the tour or A-B scan it switches back to night mode. Any ideas? Hi. When you exit the PTZ menu .........did you just exit or did you go down the menu to save/exit Share this post Link to post Share on other sites
celnut 0 Posted October 9, 2018 Hi, I bought a PTZ dome from china, it states that it is a Sony 9600-1. I don't need the camera to switch to night mode as there is plenty of light and the IR triggers the other cameras when it is on guard tour, so I switched it to day mode by calling preset 83, but when I start the tour or A-B scan it switches back to night mode. Any ideas? Hi. When you exit the PTZ menu .........did you just exit or did you go down the menu to save/exit hi, there is no option to save from the menu Share this post Link to post Share on other sites
emmagreen99 0 Posted October 12, 2018 There might be save option some where you just have to look for it... Share this post Link to post Share on other sites
celnut 0 Posted October 12, 2018 There might be save option some where you just have to look for it... I'll post some pictures of the menus if the moderators allow it, and show what I've tried Share this post Link to post Share on other sites
celnut 0 Posted October 16, 2018 Ok, so I go into the camera menu and go down to 'Dome' - main menu -------------------------- System - Dome Camera Language Display Reset Exit then down to 'I R Display' - main menu -------------------------- Comm - I R Display Guard Tours A = B Scan Pan Scan Park Action Privacy Zone Advanced Exit now I've got 'Working Mode' - main menu -------------------------- - Working Mode Auto Testing Time 08S Output Power 100 Illumination 02 Ambient Light 50 I R Switch Zoom 07 Exit enter edit mode and the curser changes to a '>', now I have 3 choices main menu -------------------------- > Working Mode Auto Testing Time 08S Output Power 100 Illumination 02 Ambient Light 50 I R Switch Zoom 07 Exit it's dark and I choose 'Off' and the camera indeed changes to colour (no IR) - main menu -------------------------- > Working Mode Off Testing Time 08S Output Power 100 Illumination 02 Ambient Light 50 I R Switch Zoom 07 Exit I go down to 'Exit' and come out of the OSD - main menu -------------------------- Working Mode Auto Testing Time 08S Output Power 100 Illumination 02 Ambient Light 50 I R Switch Zoom 07 - Exit the camera remains in day (colour) mode until I start a tour or move the camera, then if I go into the OSD menu again, I see the Working Mode has reverted back to 'Auto' Share this post Link to post Share on other sites
