Swussel 0 Posted October 28, 2018 Hi Everyone I am rather to new surveilance cams. Bought the IP cam in the link below about two months ago and installed it in the front entry outside the house. Camera is covered and didnt get wet. I dont have a NVR since i wanted to find a solution to upload directly into a cloud. So so far i monitor the cam with XMeye and didnt record anything. https://www.aliexpress.com/item/GADINAN-H-265-3MP-SONY-IMX323-2048-1536-H-264-960P-720P-IP-Camera-Surveillance-Video/32892522406.html?ws_ab_test=searchweb0_0,searchweb201602_5_10065_10068_318_319_317_10696_5728816_10084_10083_10618_452_10307_532_10134_204_328_10059_10884_323_10887_100031_320_321_322_10103,searchweb201603_55,ppcSwitch_0_ppcChannel&algo_expid=07164f2a-1876-4c21-9f7b-ac2b3cae300a-9&algo_pvid=07164f2a-1876-4c21-9f7b-ac2b3cae300a&transAbTest=ae803_5 Yesterday i installed cam cloud and did port forwarding on the router. I also changed the password on the cam. Camcloud never managed to get an image, but XMeye still did. Then all of a sudden no image anymore. The cam didnt get recognised by my router either, so i did the following: - Checked for corrossion in POE splitter, looks like new - Changed power source - Changed POE splitter - Used different, shorter lan cables Nothing helped. The cam turns off about every 5 seconds and the turns back on with a "click". The power indicator lights up and then just turns of again. Plugged the power in the camera directly without the POE Injector and without any LAN cable. Still the same issue, turns on and off...... Any help how to fix this? Yesterday we did get heavy rain after very dry and warm periods. But again, the conenctions are fine and the camera wasnt wet. Help would be greatly appreciated! Thanks guys Share this post Link to post Share on other sites
MichaelHarris259 0 Posted November 1, 2018 There might be a short circuit in your camera... Share this post Link to post Share on other sites
