berry1970 0 Posted November 10, 2018 hi i am new to this site::: Hi got a slight problem with a camera fitted today. HD Camera with PTZ Camera has a approximate 35 meter run coax rg59 with power and a separate cat6 cable for the ptz. getting excellent picture quality but the PTZ doesn't work. I have bench tested the camera & recorder and they work fine) The power to the camera is also at the end of a 35m cable...and has its own power supoly any clues as to why this doesn't work (all cables are ok) Is the power to to far from the camera ? do I need a PTZ cable amplifier? thanks berry Share this post Link to post Share on other sites
tomcctv 190 Posted November 10, 2018 Hi. Have you matched up the protocol from camera to dvr. How many pairs of the cat5 have you used for data Share this post Link to post Share on other sites
berry1970 0 Posted November 11, 2018 Hi the protocol are correct as it works on a bench test. I am using CAT6 two pairs for each connection thanks berry Share this post Link to post Share on other sites
tomcctv 190 Posted November 11, 2018 Hi the protocol are correct as it works on a bench test. I am using CAT6 two pairs for each connection thanks berry Hi. Should only ever use 1 pair for data. What camera and recorder are you using also the hd format. Size of power supply and cable used for that Share this post Link to post Share on other sites
