POE voltage

[Nailgun 0]

I'd like to know what voltage I should set my POE switch to in order to run this camera. My switch does POE+ which I believe goes up to 30 volts.

Given that this system doesn't seem to allow me to post photos, here's exactly what it says on the bottom of the camera:

4K MVF IP Bullet Camera NTSC

Model No: LNB8963-C

Input: DC 12V/PoE

Power Consumption: 650mA / 7.8W

PoE: 802.3af

 

It's a Lorex. When the NVR detects it, it says something like "wrong password". I want to attach it to my router and see if I can figure out what's wrong. The five other cams in the set are detected just fine and test well.

[Cortian2 3]

Here ya go: All you need to know about PoE: http://www.veracityglobal.com/resources/articles-and-white-papers/poe-explained-part-2.aspx

[DefenditYourselfcom 1]

PoE+ is usually for beefier PTZ cameras