oyn-x recorder

[Leigh25 0]

Hi does anyone have today’s reset code for oyn-x eagle cctv camera , I forgotten it and need to login

[Nick32 0]

On 1/5/2019 at 1:49 PM, tomcctv said:

Why are you putting password into username ??

 

user name is ........ admin

password is ..........888888 or your temp one 710344

 

but that code is old .......so follow these instructions and you will get back into your system.

 

first switch off your recorder for 20 minutes.

then switch it back on and enter login like this 

user name ........ admin

password ........ 770060

 

once into your menu create a new password before you do anything else ....... You can't use 770060 after today it's only a temp code.

 

Hi mate,

I saw your posts on the cctv forum, I have forgotten my password for my OYN-X FALC 1080-8BB. Any chance you can help with a reset code for today? I quite urgently need access. 
 

Thanks

[tomcctv 190]

hi try this code 55503

but there are two falcon units under the brand ….. one is a tvt and password reset can only be done by qr code

can you post a picture of front of your unit 

 

[Sheralyn 0]

Hi there - I have Ony-X DVR and similar to everyone cannot get in. 
it says ‘lack authority’ 

Is this one where I can use engineer code today to get access? 

[Sheralyn 0]

Just now, Sheralyn said:

Hi there - I have Ony-X DVR and similar to everyone cannot get in. 
it says ‘lack authority’ 

Is this one where I can use engineer code today to get access? 

I am not able to upload pics as media too big from phone

[Georgi 0]

Hello, I bought cctv systems from eBay, but I can't enter the menu even with an administrator password, I know you don't have to write a password there, but even when the field is empty, it doesn't allow me and writes me the invalid password, please help

[Georgi 0]

53 minutes ago, Georgi said:

Hello, I bought cctv systems from eBay, but I can't enter the menu even with an administrator password, I know you don't have to write a password there, but even when the field is empty, it doesn't allow me and writes me the invalid password, please help. model:4x5-8BB serial:R18051800959  5in1 Unit, 1 Sata. 8CHN.With 1/0

 

 

[Alextalica 0]

@tomcctv Hello! Can you help me with a temp password. I tryed too many passwords and coould be locked now.

Thank you!

[PO maintenance 0]

Hi, I’m trying to set up an old OYN-X camera system with the item code 4X5-8-1TB that has not been used. I’ve tried many passwords and it won’t take them so could you please send a code to unlock it.

many thanks

[thomash2008 0]

My grandparents have a OYN-X system and the password they originally set doesn’t work. We can’t recover as it asks for a dynamic password can anyone help pls? @tomcctv

[tomcctv 190]

Hi. Oyn-x  use a few brands can you post a picture of the menu screen also how old is the recorder

[thomash2008 0]

On 11/9/2021 at 8:23 PM, tomcctv said:

Hi. Oyn-x  use a few brands can you post a picture of the menu screen also how old is the recorder

It’s won’t allow me to upload a pic. The menu shows user name and password.  On the bottom it says retrieve, submit and cancel. 
when you press retrieve it asks to answer a question or for a dynamic password. I think it’s the barebones oyn-x. 
@tomcctv

[Sean Compton 0]

Hi can someone provide todays temp password code for my system? Oyn-x. It’s a Secyour box. Username is “admin” but I don’t know the password.

[Sean Compton 0]

On 1/5/2019 at 1:49 PM, tomcctv said:

Why are you putting password into username ??

 

user name is ........ admin

password is ..........888888 or your temp one 710344

 

but that code is old .......so follow these instructions and you will get back into your system.

 

first switch off your recorder for 20 minutes.

then switch it back on and enter login like this 

user name ........ admin

password ........ 770060

 

once into your menu create a new password before you do anything else ....... You can't use 770060 after today it's only a temp code.

 

I have the same issue, can anyone supply a temp password?

[Matread 0]

Hi all, I have an onyx/qvis NVR and we’ve not got the password. Can someone sort me out a dynamic password for it please? Desparate

[tomcctv 190]

1 hour ago, Matread said:

Hi all, I have an onyx/qvis NVR and we’ve not got the password. Can someone sort me out a dynamic password for it please? Desparate

Hi it depends on which unit you have …. Which app do you use for remote viewing 

[Matread 0]

22 minutes ago, tomcctv said:

Hi it depends on which unit you have …. Which app do you use for remote viewing 

Hi there, I’ve never used an app for remote viewing I’m afraid! Bottom says VIPER-NVR-4K-4BB

[tomcctv 190]

Hi ok the viper (app is SuperLive plus)

this system is only resettable via a qr code from your machine and it can take 12 hours for pass code

 

you should press retrieve password in settings….. it will then display a qr code 

you cam then PM me that QR code

 

or on setup …. You are asked to insert your own password followed by a reminder question …. Have you tried that

[Matread 0]

6 minutes ago, tomcctv said:

Hi ok the viper (app is SuperLive plus)

this system is only resettable via a qr code from your machine and it can take 12 hours for pass code

 

you should press retrieve password in settings….. it will then display a qr code 

you cam then PM me that QR code

 

or on setup …. You are asked to insert your own password followed by a reminder question …. Have you tried that

I’ve tried that - it doesn’t show a QR code when I click retrieve it just asks for a dynamic password and pops up the details etc

 

it appears the system was setup without an emergency question either

[tomcctv 190]

Have you tried the standard password

[Matread 0]

I’ve tried admin user and admin password, are there others? I’m so sorry thank you so much for your help 

[tomcctv 190]

Hi. 
User is admin

password is 123456

 

is your system connected to a network 

where are you based

[Matread 0]

That Hasn’t worked either

[Matread 0]

Based in U.K., Aylesbury. It is connected to LAN but I don’t think the setup was ever done to link it to a network on the software 

[tomcctv 190]

Ok then you need to go into password retrieve …. Then go into dynamic at the top of that icon and send picture to my PM