giancai 0 Posted February 9, 2019 hi all the forum.... i have a dvr with xmeye software and i would like update. the model is ahb 7004T lm v3 with chip hi3520, and software now installed V4.02.R11.52431191.10001.231900.00000 it's possible help me for try or if you have a update of my dvr? i great and best regards. thanks advance Share this post Link to post Share on other sites
tomcctv 190 Posted February 9, 2019 Why do you need to update ? Share this post Link to post Share on other sites
giancai 0 Posted February 20, 2019 hi.... because not read only hard disk western digital, but if i install hard disk on another dvr 7008 or 7016 or on pc the hard disk work normally. if i install on the 7004t another hard disk seagate, toshiba.....work normally also the 7004t... i think that upgrade resolve my problem....i hope.... you can help me? Share this post Link to post Share on other sites
keat63 0 Posted March 1, 2019 I went to look at a HIKVision for a friend last week where the HDD would just drop out for no reason. The DVR would record for 3 or 4 hours, then the HDD just dissapears. Reboot the DVR and it would come back for a few hours more. I tried 3 other HDD's in the DVR, and when none of them were recognised at all, i knew there was something else going on. It turned out, that whoever installed the system, had fitted a splitter cable on the DVR PSU to power an IP camera. Once I removed the splitter and had the power supply feed only the DVR, it's been fine since. Share this post Link to post Share on other sites
giancai 0 Posted May 15, 2019 Other problem not arrived photo alarm push,bit only email....why? Share this post Link to post Share on other sites
