AVH304 motion sense not adjustable

[shug 0]

Hi, spent few hours on this, motion detection is stuck on minimum and the menu item for the area is missing. I am using 3mp cameras, onvif complient. This is the first IP system I have owned, previously used conventional systems with separate analogue video/audio feed. 

I can view the cameras fine, can manually record, and play back video from them. 

Any suggestions?

Cheers. 

Hugh

[tomcctv 190]

Hi shug this usually means your are using a 3rd party camera (not same maker as nvr)

do you have any alarm inputs on the nvr you could use ?

also have you gone into the ip camera menu and seen if alerts can be done from there

[shug 0]

Hi, 

thanks for the reply, I wanted varifocal cameras, so assumed they were compatible as onvif compliant. Not looked st the camera menu yet, only configured ip address on them. 

I will check tomorrow. 

Cheers. 

[tomcctv 190]

Hi  onvif comparable will allow your camera to work but in some cases will not allow some of the functions ....buying same make recorders and cameras there is no issues.