Gazzer 0 Posted March 12, 2019 Morning all..... new to all this stuff. i have a Swann dvr with Swann camera’s an all works purfect. 4 channel bought another2 new camera’s an they don’t work/show any picture on the screen. They power up because can see the IR LEDS come on in the dark but no video. i tested the camera’s on a friends dvr an they still show no video... from what I have read online is it something to do with Analogue an HD camera’s. the camera’s I have are Swann bullet analogue, I think, BNC connector on the end, yellow an red connections cameras I bought are GOVISION CMOS5mp 12volt system pal. yea prob should of bought Swann camera’s but they were a good price...... also when buying cameras that may not be Swann what am I looking for so they will work with my Swann system ...H.264 DVR, 4 channel hope some one can help.... thank you Share this post Link to post Share on other sites
jeromephone 6 Posted March 12, 2019 Is your dvr pal? govision sounds like a ripoff of Geovision Share this post Link to post Share on other sites
Gazzer 0 Posted March 12, 2019 Yes it says in the spec... Video System....NTSC/PAL Share this post Link to post Share on other sites
Ohm 0 Posted April 25, 2019 You want the NTSC setting in the USA. Share this post Link to post Share on other sites
