PE2850 0 Posted March 22, 2019 I'm having an issue trying to tune some outdoor cameras... I get a large amount of false positives, triggering recording with almost no objects. The outdoor cameras are monitoring a parking lot. I have a combination of 2 and 4MP cameras Geovision GV-VMS (Latest Version) I've masked off areas that could trigger false positives Configured noise tolerance to highest level (3) Configured Ignore environmental changes With the sensitivity option, I cant seem to find a right setting. I'm getting OK results at around 7, but for example I have one camera that misses cars traveling by at a slow rate, yet its picking up a garbage can liner blowing in the wind. I'm not even sure the sensitivity options, or the mask options actually work; it seems like they do little if anything. Minimum duration setting helps but then it starts to miss events (assuming it cant process it fast enough to grab cars). The VMS has plenty of horsepower (CPU runs at around 40%) Any suggestions or thoughts? Share this post Link to post Share on other sites
larry 2 Posted March 22, 2019 Yeah, just let it record 24/7. That masking stuff is all based on software code. If you want something reliable, try using optex sensors. Share this post Link to post Share on other sites
