Rollie 0 Posted April 14, 2019 Not sure whats wrong? It appears to be 2 or 3 layers or images. I'm not sure. If someone can help I would appreciate it. Thanks Ron Share this post Link to post Share on other sites
Rollie 0 Posted April 16, 2019 nobody has any idea? Share this post Link to post Share on other sites
jeromephone 6 Posted April 16, 2019 Are these IP or analog? I would disconnect one and see if it makes a change in the other. Are these run on the same cable . say different airs on a cat5 cable with baluns. If analog are they using the same power supply. Have you checked voltage at camera and the connectors. Share this post Link to post Share on other sites
Rollie 0 Posted April 16, 2019 Analog CCTV. They are separate from everything. I have tested V using Battery, wall Wart, Power supply and a Sav4D. The power supply was used first with a buck converter. Then battery W/Buck. etc. I tested from 5V to 13V all DC. I have no idea of the background these 4 cameras have. They were given to me, I was going to give then to a buddie so he could keep a eye on his little kids in the yard. Two of them are the same. one is great one is the top picture I believe. The other two are dome cams one is the other picture. I have used different cables while testing. Lately just a RCA cable straight into a monitor or straight into my Digimerge DVR. I also hooked them in place of one of my cameras in my shop. still same results. Thanks Ron Share this post Link to post Share on other sites
jeromephone 6 Posted April 17, 2019 it could simply be the cameras have taken a surge or something has just gone out. How old are they and how much to replace Share this post Link to post Share on other sites
Rollie 0 Posted April 17, 2019 Thanks for your input I appreciate it. Just when I was taking IR and lenses for the parts box........ I found the problem. boom Share this post Link to post Share on other sites
