pancake95 0 Posted May 29, 2019 Hello, I have made installation of brand new two cameras(hikvision DS-2CE16U1T-IT3F) and a DVR (hikvision DS-7108HUHI-K1). It was a complect so I was not bothered that something will not work, but after putting the cameras on place and powering them and the DVR, the DVR turns on and I get picture of what the two cameras "see" and after about 10-15 seconds I get "no video" on both cameras at the same time. What could that be? The connectors on the coax are putted by me, I checked for dc voltage on the end of the cables and I get constant 12v. Please help me, because I do not know where the problem might be. Share this post Link to post Share on other sites
