Add POE camera to wireless system?

[MJY 0]

Hi guys, I have a 8 channel NVR system with 4 cameras (model TC-734NVR To be exact. One of the many, but they are all the same on the inside). All the existing cameras are connected dirrectly to the NVR wirelessly. The NVR is all wireless and does not have and camera ethernet ports. I'm wondering, if it's possible to hook up a RLC-410 5MP poe camera to it by connecting it to the same network as the NVR?

[tomcctv 190]

Hi. Looking at the manual for your listed nvr

its spec shows it is 960p and cameras are only 1mp

so it look very unlikely the unit can operate anything above that and the software will not allow you to go 5mp

[MJY 0]

11 hours ago, tomcctv said:

Hi. Looking at the manual for your listed nvr

its spec shows it is 960p and cameras are only 1mp

so it look very unlikely the unit can operate anything above that and the software will not allow you to go 5mp

Hi,

The model I have installed is actually 2MP with 1080p cameras.

Then would it be possible to install peo cameras with the same resolution?

 

 

 

 

[tomcctv 190]

Hi. Manual says yes via switch .... but it does not say if you can use other brands. 
There is no mention of onvif in its spec ..... which is a communication path for using between brands   So you might only be able to use same manufacture