SB_Jim 1 Posted November 19, 2020 Hello - I've used three separate PIRs for a few years to trigger certain cameras. For a long time they were reliable. Now I'm wondering why one in particular is not working properly. My RECORD parameters can be all of the usual... (Motion, Alarm, Motion and/or Alarm, or simply Alarm). Even when I select only Alarm - I'm getting frequent triggers on that channel when I don't suspect there are any actual triggering events (heat, for example). This is a curtain PIR on the back of my home and I know well the area it's looking at. It will pick me up when I cross the PIR "path", but it's triggering many times both day and night when I can't imagine there is a cause. I've got zero "motion points" defined in the actual camera, and the cameras (two triggered by this PIR) do not appear to trigger by motion - as I would hope they wouldn't. So, I'm wondering why the PIR is doing what it's doing now - when the wiring is still correct to the alarm input terminal (as has been the same always). Any ideas before I consider a replacement PIR? Thx - Jim Share this post Link to post Share on other sites
