Koylum 0 Posted January 23, 2021 Lütfen aşağıda yazan karttaki kırmızı kareye ut21 aldığım IC'nin adını yazınız. İçimde bir yuvarlanma bulamıyorum. tesekkur ederim. Share this post Link to post Share on other sites
Koylum 0 Posted January 23, 2021 Please help urgently Share this post Link to post Share on other sites
tomcctv 190 Posted January 23, 2021 Hi. It’s a 7 year old unit ..... the question your asking can’t be answered (name and value of part in red circle) then your going to have the problem of unit starting the software.... 9 times out of 10 problems like yours corrupts the software DVRs are cheap to replace Share this post Link to post Share on other sites
Koylum 0 Posted January 23, 2021 22 minutes ago, tomcctv said: Selam. Bu 7 yaşında bir birim ..... sorduğunuz soru cevaplanamıyor (kırmızı daire içindeki parçanın adı ve değeri) o zaman ünitenin yazılımı başlatma problemi yaşarsınız .... sizinki gibi 10 problemden 9'u yazılımı bozar DVR'lerin değiştirilmesi ucuz The integral that I got inside the red square is exploded. his name is not read. Integrated name. I thank you very importantly. Share this post Link to post Share on other sites
Koylum 0 Posted January 23, 2021 There are friends who use the device I wrote above, I think we have a friend in the forum (named Maxastuta user). shared the same circuit board, but I could not read over the integrated in the picture. asked for help with software. He added the circuit board. The link I gave below has already asked for help. I wrote to your private, unfortunately, there was no return. this integrated name is very important, please help. https://www.cctvforum.com/topic/50422-problems-updating-dvr-setik-st-6204h/ Share this post Link to post Share on other sites
tomcctv 190 Posted January 23, 2021 22 minutes ago, Koylum said: The link I gave below has already asked for help. But never got it working ...... once you have components gone like yours ... it will loose boot up it’s too old your wasting your time Share this post Link to post Share on other sites
Koylum 0 Posted January 23, 2021 46 minutes ago, tomcctv said: But never got it working ...... once you have components gone like yours ... it will loose boot up it’s too old your wasting your time I already know it's old. Just let me know the name of the integrated. Share this post Link to post Share on other sites
tomcctv 190 Posted January 23, 2021 TC mosfet power drive but again you and anyone needs to know the values needed ....... if not printed on component then manufactures removed part number Share this post Link to post Share on other sites
Koylum 0 Posted January 24, 2021 On 1/24/2021 at 1:55 AM, tomcctv said: TC mosfet power drive but again you and anyone needs to know the values needed ....... if not printed on component then manufactures removed part number I wonder if you do not have any information about the name of the component, number or series. thank you. Share this post Link to post Share on other sites
tomcctv 190 Posted January 25, 2021 9 minutes ago, Koylum said: I wonder if you do not have any information about the name of the component, number or series. thank you. On 1/23/2021 at 10:55 PM, tomcctv said: TC mosfet power drive but again you and anyone needs to know the values needed ....... if not printed on component then manufactures removed part number 8 leg mosfet power drive but the name is no good without knowing the value On 1/23/2021 at 12:17 PM, Koylum said: Please help urgently built 2012 ....... that will also give you problems .... NO software it’s like me asking you to tell me the last 4 numbers of my phone number Share this post Link to post Share on other sites
