Jules 0 Posted February 12, 2021 Hello everyone I'm new to the group! I only know a little about setting up CCTV, but I learn by doing better than just reading, but in saying that I do have a problem. I was burgled a year or so ago and had a lot of things stolen, since then I managed to get some Wansview W2 (X series) and Q35 (X series) cameras. I originally set them up on my phone and iPad, but as some are Wifi (and it slows down my Wifi) I'm trying to set them up on Cat5 cable to a XVR. I've now purchased an Zxtech Onya XVR and having problems viewing the cameras on the monitor. They are on Onvif and I've tried RTSP. I have looked at the IP addresses and tried a few things, but still not able to view. It just says "No Video". I contacted Wansview and they asked a question and I sent back a reply. Since then now response and this was over a week ago, I've sent another chaser email, still no response. I originally asked the Zxtech Supplier if they were compatible before purchasing and said they should be! Please can anyone help me? Thank you for reading. Jules Share this post Link to post Share on other sites
