Cant find replacement fuse for power supply

[crunkin4justinrt 0]

Dvr has its own power supply that’s plugged into a power strip. It’s not going to the power supply from what I can tell. 

[crunkin4justinrt 0]

Hi both of these hanging black wires were plugged into my old power supply. Look at the picture again. 

[tomcctv 190]

I can see 6 flex cable connectors in your old unit picture .... I can’t see the one with braid and black cable. 
 

[crunkin4justinrt 0]

Ok update. I have it all working! One of the white wires that had the red and black was connected to nothing. Added the 2 black wires and all of my cameras are now  on! Thank god. 

[tomcctv 190]

Ok that’s good we learn everyday

One thing I am going to ask that you do because it’s a fire risk 

all of your cables are showing long conductor wire ends they should not be any wire showing from terminal block .... it won’t take you long to re do them just use a pair of scissors to cut ends shorter ..... this will stop any shorting out if any cable is pulled 

 

Give your self a pat on your back

[crunkin4justinrt 0]

Thanks Tom! Man I can’t imagine getting those wires back in the terminals, they were a real *** to get In there lol. Is it safe to leave plugged in until this weekend when I can re do it?

[tomcctv 190]

Yes they can be fiddling.... trick is to fully unscrew them and insert a small screwdriver to help push the lockdown plate up

Dont leave it past weekend 

good job