Adamperth 0 Posted May 2, 2021 Have searched and checked the first 15 pages but cant seem to find the asnwer. Every amp (4) I have purchased and tested, once I plug camera audio output into an amp, there is alot of static noise, and when I trigger some of the cameras inbuilt recordings, there is also alot of noise, dahua jsut say it is shielding and that is all, Issue is, all cables are shielded, common power supply for both camera and amp, have tried a ground loop isolator. So the question, what amps have been actualyl been used successfully with Dahua camera's? Share this post Link to post Share on other sites
tomcctv 190 Posted May 2, 2021 Hi. Which amp are you using ? Share this post Link to post Share on other sites
Adamperth 0 Posted May 2, 2021 5 hours ago, tomcctv said: Hi. Which amp are you using ? I have tried these two from Kemo https://www.kemo-electronic.de/en/Light-Sound/Amplifier-Splitter/M032N-Amplifier-12-W-universal.php https://www.kemo-electronic.de/en/Light-Sound/Amplifier-Splitter/M032S-Universal-Amplifier-12-W-Plug-Play.php Also tried https://www.jaycar.com.au/boom-box-amplifier-with-bluetooth-audio/p/QM3410 https://www.jaycar.com.au/compact-2-x-20wrms-stereo-amplifier/p/AA0518 The boom box gave the best results, but was soley intended to test Share this post Link to post Share on other sites
tomcctv 190 Posted May 2, 2021 How loud are you looking to run the speaker what is it going to be used for Share this post Link to post Share on other sites
