tomjkg 0 Posted May 13, 2021 "Config Tool" does not find the camera on the network. How do I "find" the camera .SD49425XB-HNR? The camera is powered by a power injector: TP-link Passive 48 V POE injector 24 W. Then I removed the injector and instead connected 12w and ethernet directly to the router without any result. How can I make it work? Share this post Link to post Share on other sites
tomcctv 190 Posted May 13, 2021 Hi. Sounds like the wrong type of injector also what type of plug-in power did you use needs to be at least 12v 5amp which wire standard did you use for the rj45 thats a big PTZ and needs a lot of power when ir is in (smart ir) also what length is cable to camera Share this post Link to post Share on other sites