amberwood 0 Posted July 2, 2021 Hi guys I am looking at a CCTV mobile unit which has an Indigovision system running 2 x MIC 400 (they may even be 300's) cameras from a server and 2 x workstations. The computers have all been scrapped and I'm trying to just get the cameras up and running on a simple camera/keyboard basis. First, I have tried using the Indigovision keyboard. The telemetry connection at that end is an RJ11 connector marked RS232 and I have hard wired the other end into the MIC control unit using the A and B rx terminals. Protocol is Pelco P, baudrate 9600. And I get no response. I then tried another keyboard which has an RS484 output but still no camera control. I even tried connecting the MIC control telemetry to a RS484 output from a DVR but still no joy. I'm clearly missing something obvious here - it should be so easy. Any suggestions? Share this post Link to post Share on other sites
