ir replacement

[jmk 0]

I'm not sure this is the right place to ask this. I have a PTZ dome camera that I would like to replace the 850 nm lights with 950 nm lights. Is that possible?

[tomcctv 190]

Hi.  This will reduce your IR range on your ptz and you would also need to change your filter

the cost is a lot more than buying a new ptz

 

ptz usually now come with smart IR if this is the case with your then no it’s not possible 

[jmk 0]

Thanks for the reply.

I know the 950's reduce the range and that's not a problem. However, I don't know what or where the filter is and I'm clueless about the smart IR. Can you enlighten me?

Thanks again

[tomcctv 190]

Hi. Smart IR is when the ptz zooms the IR gets brighter and dimmer when zoom in

this stop white out

a filter is what allows your camera to see when IR is on …… it’s either a motorised filter lens or on cheap cameras it on the lens

filter for 850 will not always see 950 ir

 

what is it your trying to do 

[jmk 0]

Hi,

I have a PTZ camera (Eversecu) at our gate about 500 feet from the house and it works great. However it is very visible at night because of the 850 IR's and I would like one with 950 IR's so that it's not so obvious to people. My gate and property is at the end of a dead end road out in the country. I just don't want it so obvious.

I've contacted Eversecu (thru Amazon) and haven't heard anything yet.

I'm just researching my options.

Thanks again for your reply.

[tomcctv 190]

Hi with Eversecu you can’t change filter or IR

 

switch ptz to day mode only and insert some PIR lighting around your gate area

[jmk 0]

Thanks for all your help, I will look into the day mode only.

Thanks