No Motion Detection on IP cams

[Burnttoast 0]

Hi guys,

Wasnt sure if this needs to go in camera section or CCTV box section. so apologies if its in the wrong place.

I have a OYN-X Kestrel 5MP CCTV box with 4 analogue cameras and 2 IP cameras (wanscan).

The box itself works great and I am very happy with it but I cannot for the life of me work out how to get motion detection on the IP cams.  The little checkbox is greyed out so I cannot enable it.  The analogue ones work flawlessly.

Manufacturers say that the box does do motion detection for the IP cams but have no idea why it doesnt work in my case.

To be clear the IP cams all work fine bar the motion detection option.

I have tried enabling and disabling motion on the cameras themselves.  reinstalling them all to no avail.

Any thoughts, ideas or suggestions would be gratefully received!

 

Thanks

 

[tomcctv 190]

Hi. This is not unusual when using other brands 

you may find your wanscan cameras have set up using obvif …… and only allowing you the basics …. Motion on cameras is not compatible with recorders motion software

[Burnttoast 0]

I suspected the camera motion would interfere.  I will double check whether its onvif or rtsp. 

Thanks