New kdnet software 2006.8.10 doesnt work . Help me!!

[urubullino 0]

Hi.

I have anykeeper 2016 and I use kdnet 2.50.16.0 software.

I tried to use the new software "DVR Program (2006. 8. 10.)" but i couldnt.

First message :"no capture device" and the program didnt start.

After, I uninstalled the driver and installed other driver , that came with program.

The programa started but a window alert saying "no image" and a bip sound.

 

The old version KD-Net 2.50.16.0 software works perfectly.

 

How can I use this new software version (DVR Program (2006. 8. 10.)) ?

Anyone have installed it?

 

Thanks

[cctv_down_under 0]

Only guessing but is it possible that you installed the software before installing the drivers, the way some software is written it can actually lock in the card (so to speak) so that it will never recognise the driver.

 

i would try to unistall the hardware and remove the software and check the registry then try again, but I know nothing of this product sorry!

 

~ I hope this helps

[urubullino 0]

I installed the driver first and after, the program

[cctv_down_under 0]

Sorry i do not know this product too well, and am not all that fond of it really.

[MattVidionics 0]

Do a search on this forum for "koditec" and you'll find lots of information.

 

The anykeeper DVR card has a firmware chip. If it is an older style card (as mine is) you are limited to the version you mention.

If you try to use a higher version on an older card, then it will say "DVR card not found" at the end of the installation.

 

If you want to use the latest Anykeeper/Koditec software, you'll have to buy a newer DVR card such as these:

http://anko-tech.com/products/wdt.htm

(this is only a search that I did, use it to see the latest cards)

 

(I would personally go with Geovision or Avermedia if you are looking at replacing your card though!)

 

Matt