nvr8-7250 0 Posted February 5, 2022 Hi All, I have an older Swann NVR8-7250 from Costco. It has 8 ports for POE cameras. It came with 4 cameras that work well when plugged into the respective camera ports on the back. I wonder if this thing works with the IP cameras on LAN. When I go to the camera menu in settings, there is a Search button, which, when pressed, sees a camera which I put on my LAN with all attributes correctly identified. However, there is no way that I see to use that camera. My LAN and my camera network are configured to use different subnets. I want to move cameras to the LAN side off of the individual camera ports. Is this possible with this NVR? Also, I found info that this is a rebranded Hikvision NVR. I found a few references to its Hikvision firmware levels; however, none of them worked when I tried upgrading through the menus from a USB stick. This turned into a loaded question : ) Any pointers are appreciated. -costco shopper Share this post Link to post Share on other sites
