Diagonal Lines

[James R Owens 0]

This topic has been discussed before in the forum and have tried all the troubleshooting procedures mentioned to his post without any success.  I have eight (8) cameras (WBox) which are hardwired via RG-6U and BNC connectors.  There is just one camera that has diagonal lines.  I have direct connected the camera to the DVR (EX-SDI) and the camera works fine using 1080@30P TVI.  I have tested the outside connection lines for continuity and they are working.  So here are the troubleshooting procedures I have tried:  Replaced all the BNC connectors. and tried all modes:  AHD, TVI , CBS and EX-SDI modes.  All modes still display the diagonal lines but the best mode is  TVI because the color is reinstated.  Then I placed RF chokes on the camera side as well as a ground loop; still have the lines.  Tested for power at the camera end which read 12.4 volts.  Placed an inline filter on the DVR; still have lines.  Tested with a second camera with the exact same results.  What have I missed?