pauul TIS 0 Posted April 6, 2022 Hi Everyone, We have a project where we are using a HIK system to control legacy cameras these cameras are using Pelco, or Synectics protocols. We cant just use off the shelf protocol convertors as the client requires tours to be stored and old cameras using these protocols do not store tours in the camera its self. We have managed to create a HIK to Pelco convertor that works well and can store the tours on its own eprom. However we cant find any information n the Synectics protocol. and when we try to read it the hex is constant and looks like noise. Does anyone have any information on the Synectics protocol? Alternatively if any one had an old Synectics Mini DC receiver board running Pelco could I buy that? then we could copy the protocol chips and replace them in the boards we have running the Synectic protocol. Thanks for any thoughts Paul Share this post Link to post Share on other sites
