Esard 0 Posted June 18, 2022 have a K8204-W NVR Sequence number 9013160200 Software version 3.0.3.0 Video setting 1280 X 720 2 cameras Name IPCAM Video resolution 1280 X 720 2 cameras Name 5322-W Video resolution 2304 X 1296 NVR video manage page has error message Resolution to big for these 2 cameras. Open the NVR management in a web browser On the setting heading page encoder settings attempted to set cameras to 1280 X 720 When saving error message Permission denied displayed. How do I change the resolution setting for these 2 cameras? Share this post Link to post Share on other sites
tomcctv 190 Posted June 18, 2022 11 hours ago, Esard said: have a K8204-W NVR Sequence number 9013160200 Software version 3.0.3.0 Video setting 1280 X 720 2 cameras Name IPCAM Video resolution 1280 X 720 2 cameras Name 5322-W Video resolution 2304 X 1296 NVR video manage page has error message Resolution to big for these 2 cameras. Open the NVR management in a web browser On the setting heading page encoder settings attempted to set cameras to 1280 X 720 When saving error message Permission denied displayed. How do I change the resolution setting for these 2 cameras? Are your cameras wireless Share this post Link to post Share on other sites
Esard 0 Posted June 19, 2022 Yes cameras are wireless so the only way to access the parameters is via the NVR web page. Share this post Link to post Share on other sites
tomcctv 190 Posted June 19, 2022 10 hours ago, Esard said: Yes cameras are wireless so the only way to access the parameters is via the NVR web page. Have you updated the nvr and camera firmware since 2021 Share this post Link to post Share on other sites
Esard 0 Posted June 19, 2022 I have searched for firmware and tools to enable parameter setting to no avail. Share this post Link to post Share on other sites
tomcctv 190 Posted June 19, 2022 http://helpen.dvr163.com/index.php/Common_IPC_firmware Share this post Link to post Share on other sites
Esard 0 Posted June 22, 2022 Thanks for that however that only upgrades equipment does not allow parameter change. I have now solved the problem. Right click on NVR screen select System setup - System Admin - User - Edit user - tick all - OK - OK Using browser enter the NVR IP and sign on using account (normally as set Admin blank password) Select Setting - Encoding Settings Select the channel (1 to 4) - Select the correct resolution setting (available 1280 X 720, 1980 X 1080, 2304 X 1296) - save the change. I now have all 4 cameras working correctly Share this post Link to post Share on other sites
