QT-5140 DVR doesn't go to sequential imaging on monitor

[Martgab83 0]

I installed a QT-5140 DVR with 4 cameras and the system is working fine; however, after the whole setup was completed, in just two occasions the Image sequential mode worked fine, but when I decided to switch it from TV mode (Video) to PC VGA mode, the images stay static on the screen instead of showing them sequentially as required. Though I have been going back and forth trying to make this sequential action, nothing changes the 4 images on the monitor. I have been reading the CD manual, but I don't find any information about it. I wonder, what I can do to make the 4 images existing on the monitor to be replaced sequentially one after another as needed?

[tomcctv 190]

Hi. Changing from tv mode to vga is a bit confusing 

how is your monitor setup …. Are you connected vga only and your switch from dvr menu …. Or did you have composite tv out used to tv

 

i take it this is a old analog system QT is a qsee part number 

does your unit have vga and hdmi outputs on the back 

qsee also used the term tv output …. But is infact spot monitor