playtime 0 Posted September 18, 2022 I am new to cctv, making changes for last 10 days but every time a new problem arises. right now I am facing an issue which is my nvr records a video in approx 1 min or 30s files. set to motion recording, if there is an ongoing motion of 2 mins the recorded video in 1st file is good but, in second video the recording is not starting just after it finished after a first video there is a gap of 4-6s. following is my Devices pls guide me to achieve best settings. I am from India. Camera Specifications Hikvision 2MP POE Bullet Camera Max. Resolution :1920 × 1080 Shutter Time :1/3 s to 1/100, 000 s Main Stream : 50 Hz: 25 fps (1920 × 1080, 1280 × 720) : 60 Hz: 30 fps (1920 × 1080, 1280 × 720) Video Compression: Main stream: H.265/H.264/H.265+/H.264+ : Sub-stream: H.265/H.264/MJPEG : Third stream: H.265/H.264 Video Bit Rate : 32 Kbps to 8 Mbps H.264 Type : Baseline Profile/Main Profile/High Profile H.265 Type : Main Profile NVR Specifications Hikvision DS-7W04NI-Q1/4P 4-Channel Built-in PoE NVR Supports H.265/H.264/H.265+/H.264+ HDD 500GB Internet 40Mbps rated, actual speed 40-50Mbps Total 5 Devices connected at a time, MacBook, TV, ipad, cell phone & NVR Below is my current settings: Motion detection On resolution 1920x1080P video quality: Highest fps: 25 pre & post recording set to: 10s Bitrate: Constant 4096 Compression: H.264+ Share this post Link to post Share on other sites
