Kebo2r 0 Posted December 1, 2022 Hello! Any tips or tricks for getting rid of false motion detections for REX on 3 sets of glass front doors? Each door pair has a XMS motion sensor over the center of the door. Sensitivity jumper removed to decrease sensitivity and still getting periods of false motion every minute or less unlocking the doors…. I’ve adjusted till I’m blue in the face. Any tricks? thanks! Share this post Link to post Share on other sites
Ann Norbert 0 Posted February 12, 2023 Hello, I have a question: Do you use a combination of PIR and MicroWave sensors? Or only REX sensors? In general, these sensors have no smart functions, so they can't read whether the input was safe or forced. If possible, replace it with a combination of these sensors or at least MV sensors. Better yet, use a intercom telephones with sensors already built in. The combination of RIP and MicroWave sensors is designed to eliminate the possibility of frequent false alarms. And REX is only made to detect whether the door is open or closed. Share this post Link to post Share on other sites
tomcctv 190 Posted February 12, 2023 4 hours ago, Ann Norbert said: REX is only made to tell if the door is open or closed. Can just see this turning into a sales pitch well that is the job of the sensor or to be more accurate it controls the lock to open microwave will only give more range which is not a good thing ….. that it’s self makes it more unreliable Share this post Link to post Share on other sites
