Cameras

[Mart weeks 0]

4ch Floureon home CCTV system. When only o e camera plugged in works fine. When connecting others all signal goes. Have replaced main unit,  leads and power splitter cable still the same please help

[tomcctv 190]

39 minutes ago, Mart weeks said:

4ch Floureon home CCTV system. When only o e camera plugged in works fine. When connecting others all signal goes. Have replaced main unit,  leads and power splitter cable still the same please help

Hi if you have replaced the main unit and still have the problem it can only point to a camera problem

faulty camera 

polarity wrong way on camera power

back coax connections 

or wrong size camera power supply

 

how many power supplies are you using and what size are they

[melonwater 0]

Hello, I am a newbie from world of mario. Say hi to all.

[Nassau Cable 0]

Hi. It is important to check the electrical plug to determine which cords will work with the types of appliances. Another tip you need to take into consideration is that if you are using an extension cord, it should not be drawing more current than the wiring can handle because that would not connect well or even trip a circuit breaker.

[adammerve 1]

u need to take into consideration is that if you are using an extension cord, it should not be drawing more current than the wiring can handle

 

 

 

 

Showbox jiofi.local.html tplinklogin

[tomcctv 190]

4 hours ago, adammerve said:

u need to take into consideration is that if you are using an extension cord, it should not be drawing more current than the wiring can handle

 

 

 

 

Showbox jiofi.local.html tplinklogin

Hi does not apply in this case as mains powered cameras (110/240v) don’t exist anymore