xcopy- 0 Posted October 25, 2006 (edited) Well people the problem was the CPU, First time in my life I see a CPU work on a motherboard that requirs a different chipset... Pent D's are picky that way I supose... slaped in a compatible CPU and voila problem solved PC has been on and recording for a solide week now... I have another question but I'll make a new thread for that one... ------------------------------------------------------------------------------ Is it common for a PC to lockup when adding a second DVR card? I can't go into much detail on the PC specs but the hardware more then meets the sys reqs. the DVR cards have PLX chips and run flawlessly with a single 8 chan but system stability goes out when adding another 8 chan DVR card... the pc lockups occur most when starting my DVR software. I know your thinking it's the software... but would it still be the software if the sys. runs perfectly with 1 card and not with 2.... Oh well hope someone out there has ran into this issue before Thanks guys Edited November 9, 2006 by Guest Share this post Link to post Share on other sites
ben_indo 0 Posted October 26, 2006 hi; can you give more informations on your card/ the manufacturer/ software version etc, some systems are designed for multiple PCI cards (i.e anykeeper, vguard), but others only for one single card (i.e geovision). and your PC hardware configuration Ben Share this post Link to post Share on other sites
xcopy- 0 Posted October 26, 2006 Oh I think I figured it out ... I have my DVR prog in my Start-up ... and for some reason my DVR client is looking for the service that handles the network:internet... Apon startup on Winxp, things seam to be up and ready but actually services are still being started in the background... So I made a small prog to check and ensure the net services were up and running inside windows ... seams to work fine now... crossing fingers... Off to testing now. Thanks for the reply though Share this post Link to post Share on other sites
xcopy- 0 Posted November 2, 2006 Bah that didn't do it... I've run some tests and even added multiple cooling fans on my DVR cards and my PC still randomly locks up. Could anyone tell me with a degree of certainty if by any chance a 350W power supply is way bellow what is req for any typical DVRs system? Share this post Link to post Share on other sites
