MP1li 0 Posted January 26, 2023 We are running two Honeywell 16 port nvrHN301602 XX ver 1.2.1 20220110 When the local monitor is connected to the nvr and only 1 single camera is connected (can be any 1 of the 16 cameras, I have tested all of them) you see a slight lag, frame will freeze and then continue. Over a 10 second lapse it may freeze 2 times. IT happens on local nvr with only the 1 camera connected. Experience the same issue on the second nvr as well. When viewing over the internet or mobile app it is the same results as expected. Suspect it is a setting in the nvr as both would be configured exactly the same but Im not sure where to look. Share this post Link to post Share on other sites
