DarrenA 1 Posted June 29, 2023 Hello all, I have a cam setup that runs a single cat6 cable to another part of the building, with a single IP cam on it, and was thinking of adding a second IP cam. The question is this, can I use another POE switch to "split" that single cat 6 into 2 cam ports and run it into my existing POE switch? The Switch I am looking at requires no power, just uses the incoming POE from the existing cable then splits it into 4 ports...... The way the system is set up is that the first 16 ports go into the NVR then the rest feed from a separate 16 port POE switch. All I am really asking is if I can save myself from running another 150 foot of cable to the other side of the building, thus saving some headache on my end.... Share this post Link to post Share on other sites
