uncledavid 0 Posted September 7, 2023 Two of our HM211's were working fine but several brief power glitches from Hurricane Idalia caused one to lose the link. I tried PixPlus wifi but that failed. Took it down, brought it inside, and the same failure. Connected via a known good RJ45 cable to the router - the setup runs to 100% then says minor errors, try again (a totally worthless error message). Tried 3x - same error - with no hint from PixPlus as to why. Any suggestions, please? Thanks! Share this post Link to post Share on other sites
uncledavid 0 Posted September 8, 2023 Follow-up ... Heimvision instructed me to try a reset. Did that 3x, using both wired and wireless connection options, no joy. Also, they informed me that the 2yr warranty had expired, so support ended as well. So, a Heimvision camera is a 2 year device - after that - it's abandonware. Share this post Link to post Share on other sites
uncledavid 0 Posted September 9, 2023 Since PixPlus was misbehaving on two Pixel phones (4a and 6) I uninstalled it and tried to reinstall. It says version 4.2 on the App store but tries (and fails) to install version 5.0 (on a Pixel 4a). It does appear to install and work according to instructions on a Pixel 3a - but fails to install the camera at the end of things ... I may try that borrowed cellphone, again. In wired mode it can be setup and viewed using Camlytics (I can also see it via a Cobra DVR). The problem there is that little voice in the camera continues to carry on about connecting via cable ... sigh. Share this post Link to post Share on other sites
