cino72 0 Posted December 1, 2023 I have a couple of these installed and every time I have a power outage the volume gains drop to the default. I need the gain to stay set at a higher level than the default when the power is restored. I spoke with Axis and they thought it may be my VMS (Genetec). I have looked everywhere and I can't find a solution to keep the audio gains up after a power failure. Does anyone have any suggestions? Share this post Link to post Share on other sites
tomcctv 190 Posted December 2, 2023 Hi this will have nothing to do with vms many cameras that go to default are not the settings you need …. I am surprised for that money the axis has no battery backup i had a problem like yours on another brand of camera …… no volume or home save on a ptz depending on the time your camera is down a ups supply might be a better option for you and not for a lot of money this is similar to what I used https://powerwalker.com/product/10120450/ Share this post Link to post Share on other sites
cino72 0 Posted December 4, 2023 I was afraid that was going to be the case. Thanks for the link inline ups may be my only option. Share this post Link to post Share on other sites
tomcctv 190 Posted December 4, 2023 8 hours ago, cino72 said: I was afraid that was going to be the case. Thanks for the link inline ups may be my only option. Hi $40 it’s a good option …… keeps your camera recording to the SD card …. So also a good backup option while no power Share this post Link to post Share on other sites
