dopalgangr 1 Posted January 19 Came home yesterday and could not access my Dahua DVR. Found that the power supply was on (fans running) but the lights on the motherboard were flashing and the system was not completely booting (nothing at all on screen). Power supply is the Delta DPS-200PB-185B, getting 11.5v on the two yellow contacts of the 4pin Berg style connector to the board. The P2 cable shows less than a volt but I am unsure of what the voltage should be on that one (red and white wires). Before I purchase a new power supply does anyone else think that's the issue here? I have short video of it but it's 112mb and can provide a link if needed. Thanks Share this post Link to post Share on other sites
dopalgangr 1 Posted January 26 So it was the power supply that was the issue. 1 Share this post Link to post Share on other sites
