trikeusa 0 Posted September 25 No matter what I do, I cannotview my analog DVR on my phone. I have a Linksys router model 14376. Programed in my port forwarding is a reserved IP address of 192.168.1.61 for my DVR. It is TCP external port 37777 internal port 9090. My DVR, I have a Lorex lh118000. Dhcp to static, media port is 9090 web port is 37777. Netmask 255.255.255.000 gateway 192.168.1. DNS1 is 0 DNS 2 is 0. auto port forwarding enabled. Then there is a setting that says mobile username = admin, password 12345678, mobile port 1025. I had a spectrum router internet service provider is spectrum couldn't get it to work on there, so I changed my router and I still can't get it to work I have tried different ports. The default gateway and IP addresses I have verified match both the router and the DVR. I can't get the view on my PC or my phone Share this post Link to post Share on other sites
tomcctv 190 Posted September 25 Hi are you using a APP ? Share this post Link to post Share on other sites
Sir Flannel 0 Posted 14 hours ago Is the Spectrum modem providing the outside IP address to the Linksys? Check the WAN information in the Linksys setup, if it shows an outside IP of 10.x.x.x or 172.16.x.x or 192.168.x.x, that means the Spectrum modem is providing a local IP to your Linksys, and you would have to open port forwarding on the Spectrum device as well. If you are getting an outside IP, have you tried setting the DVR in DMZ mode? Share this post Link to post Share on other sites
